Restore the effective moisture management and structural integrity of your indoor unit with the Samsung Air Conditioner Drain Tray Assembly DB94-02961A. This component, also known as a condensate pan, is situated directly beneath the evaporator coils to collect the water that naturally condenses during the cooling process. It features a precision-sloped design that directs water toward the drainage outlet, preventing stagnant water buildup and potential indoor leaks. If your unit is dripping water from the chassis, showing signs of mold growth along the bottom edge, or if the plastic has cracked due to age or thermal stress, a new drain tray is essential.

The DB94-02961A is manufactured from high-density, impact-resistant plastic designed to withstand constant exposure to moisture and temperature fluctuations. It often includes integrated mounting points for the louver motors and drainage hoses, ensuring a perfect mechanical fit within the indoor unit chassis. This genuine OEM part ensures that condensation is handled safely, protecting your walls and floors from water damage.

Installation / Replacement Instructions

1. Safety First: Turn off the air conditioner and completely disconnect the power supply at the main circuit breaker.

2. Disassemble the Housing: Remove the front intake grille and the air filters. Unscrew the mounting fasteners and carefully unclip the main front panel housing. You may also need to remove the horizontal and vertical louver blades.

3. Access the Drain Tray: Locate the drain tray directly under the evaporator coil. In most models, the tray is secured by a few screws and plastic clips.

4. Disconnect the Drain Hose: Locate where the drain hose connects to the side of the tray. Carefully loosen the clamp or pull the hose off the outlet stub. Have a towel ready to catch any residual water.

5. Remove the Old Tray: Carefully slide the old tray out from the chassis. You may need to gently lift the evaporator coil slightly to create enough clearance. Be careful not to bend the delicate aluminum fins of the coil.

6. Install the New Tray: Slide the new DB94-02961A into position, ensuring it is seated firmly on the mounting brackets. Reattach the drain hose to the outlet stub and ensure a watertight connection.

7. Reassemble and Test: Reinstall the front housing and all louver components. Restore power and run the unit in cooling mode. Pour a small amount of water into the tray to verify that it flows freely through the drain line without leaking from the new assembly.

Compatible with select Samsung split-system indoor units, this OEM-quality drain tray assembly restores the reliable moisture collection and leak-free performance originally designed for your system.

Key Features

AC Drain Tray Assembly - Part number DB94-02961A

Precision-Sloped Design - Ensures efficient water flow toward the drainage outlet to prevent stagnation

High-Density Plastic Construction - Resistant to cracking, warping, and mold accumulation

Integrated Mounting Points - Designed for a factory-standard fit with louver motors and hoses

Compatible with Select Samsung Models - Direct replacement for a factory-standard mechanical fit

OEM-Quality Part - Restores original moisture management and prevents indoor water damage